Sticky Bumps Special Blend Soft Top Cool Cold Wax

Third Coast Surfboard Leashes are hand-made from the finest materials in southern California by long time surfer Crow Haley. Crow has been making surfing leashes of the highest quality for decades, and is still at it; crafting each one with his own two hands. Whereas the industry standard dictates cheap production from overseas, Crow continues to put his heart and soul into every leash he makes. We are proud to help keep the tradition alive. These heavy duty, 5/16" thick, all condition leashes feature a single wrap quick release cuff with molded stand-off, heavy duty double brass swivels to eliminate tangles, and 1.5" triple wrap detachable rail saver.

Australia's leading Surf Wax! Mrs. Palmers ultra sticky surf wax was established in 1988 and caters to all surfers, from beginners to the elite pros. Mrs Palmers surf wax includes a traction additive that not only increases the stick factor but also won't wear out in the water; this results in a longer lasting, stickier wax that will keep your feet glued to your board.

Mrs. Palmers is not just excellent surf wax, it's probably the most practical wax for two cool reasons. First, it comes in a convenient cardboard box - not a plastic shrink wrap that requires a machete to open or a wrapper that leaves the wax exposed to melt or get dirty - so the wax is protected, as is whatever you carry it in. The second reason is that the bars are split, so you can break them in two, making it easier to carry in your surf trunks or slip in the leg of your wetsuit.

WATER TEMPERATURE

• Cool/Cold : Below 58F / Below 14C

Third Coast Surfboard Leashes are hand-made from the finest materials in southern California by long time surfer Crow Haley. Crow has been making surfing leashes of the highest quality for decades, and is still at it; crafting each one with his own two hands. Whereas the industry standard dictates cheap production from overseas, Crow continues to put his heart and soul into every leash he makes. We are proud to help keep the tradition alive. These heavy duty, 5/16" thick, all condition leashes feature a single wrap quick release cuff with molded stand-off, heavy duty double brass swivels to eliminate tangles, and 1.5" triple wrap detachable rail saver.

Cool Temp Wax.

DESCRIPTION

High-quality Stainless Steel Smart-Screw and plate.

Smart-Screw head accepts industry-standard side-fin tools, which come standard with most board shorts today.

Smart-Screw and plate fit industry-standard center-fins and boxes.

NO DRAG, never compromising fin performance…unlike old screw and especially unlike “thumb” screws.

Goodbye screwdriver! Replacing your old screws with the Smart-Screw means never having to use a screwdriver and never again being frustrated that you forgot your screwdriver. One tool does it all!

Adjusting your center-fin in the water is simple, allowing you to compensate for rising or falling tides and swells without leaving the line-up.

Surf with confidence that your expensive center-fin is mounted stronger than “thumb” tight.

So inexpensive, you can afford to purchase several…one for every center-fin you own, replacements for travel, and one for your best mate.

- 2oz. Ultra Clear SunCure Resin - Non-Yellowing

- 15cm x 34cm Fiberglass Cloth patch

- Sanding Pad (2 grade - Smooth 120 grit / Rough 80 grit)

- 1 Cup & 3 Mixing Sticks ( Cup is used for mixing chopped cloth to resin to make a filler for small dings)

- 1 Cover Sheet and tape stickers - ( Used to tape over small filler repairs for smooth surface, after 5 minutes sun exposure)

Regular Longboard Ankle Leash for medium to large waves or a longer board. A new generation of reliability, this 10ft leash will have you covered for those days when a little more length is required - the perfect leash for all-around surf conditions.

Patented DNA Flex Mould connection

Non-Slip Cuff - Secure

Surefire Leash Release

Leash Loc

Dual Stainless Steel Bearing Swivel - SS316

2 Year Warranty

Responsible Packaging - Plastic Free

Leash Length: 10' (3.0m)

Cord Thickness: 9/32" (7mm)

Cuff Width: 2 1/2" (62mm)

Railsaver Width: 1" (25mm)

Our exclusive 3rd Coast Surfboard line is a collaboration between TCSS and the professional craftsmen at Bing Surfboards in Encinitas, California. The Bing label is one of the oldest in the world, and today they continue to build some of the highest quality surfboards to be found anywhere. TCSS owner Ryan Gerard and head Bing shaper Matt Calvani worked together to design a line of three models that would be ideal for Great Lakes surf, but like a good surfboard should, also work well anywhere in the world. We are very fortunate to be able to offer these boards at incredibly reasonable prices.

Our Warrior fish is a classic take on an old fish with some modern influence. New for this year, our Warrior is based on the Bing Sunfish template; a slight refinement on the traditional Bing twin fish. Glassed with a two-tone spray, and featuring our classic Warrior logo.

DIMENSIONS

NOSE: 17 1/8"
WIDTH: 22 1/2"
TAIL: 17 1/2"
THICKNESS: 2 5/8"
VOLUME: 42L

TAIL: Fish
COLOR: Seafoam w/White Stripe
FINISH: Sanded
FIN: Quad(included)

If you're unsure what model and/or size will work best for you, give us a ring and we'll help you get it figured out: 269-932-4575.

Fiberglass cloth is used to provide support and add strength to resin for larger repairs. This premium quality fiberglass cloth is a 4 oz. weight and measures 1 yard long by 27" wide. Safe and easy to use, it can be cut to accommodate any size repair.

The side fins have a wide base that narrows out at the top of the template. This provides drive and speed while the slightly more narrow tip makes it more responsive. The rake allows for drawn out turns and the slightly smaller center fin gives you that release off the top. Perfect combo. If you can only have one set of fins, the CF Series is a great choice!!

Move over hipsters! There’s a new Odysea® in town and its packing 7.5” of pleasure! Whether you like camping out on the nose or dropping a little knee on your turns, the Plank delivers that smooth old-school single-fin flavor with that same great LOG mega-float for wave hogging.

6’0” x 22.0” x 3.125” (57 Liters)

7’0” x 22.0” x 3.125” (72 Liters)

8’0” x 23.0” x 3.375” (86 Liters)

9.0” x 24.0” x 3.5” (98 Liters) **IN STORE ONLY**

FEATURES

• Special Fin Box that Accepts any Standard Longboard Fin
• 7.5” Performance Single Fin Included
• Super-Fun for all Skill Levels
• Tons of Float and Easy Wave Catching
• Stiff Dual Composite Core
• Triple Maple-Ply Stringers!
• Durable HDPE Slick Bottom with Bumper-Tail
• Old-School PE Deck with Throwback Design
• Designed by Catch Surf in California, U.S.A.

Captain Fin Kassia Meador 9.8 Tie Dye

Features:

Template: Balanced. Perfect for your everyday log on clean walls.

Ideal Board: Longboard.

Construction: Fiberglass construction.

A beautiful template, the Kassia Tie Dye 9.8” allows for flowing, smooth surfing from tip to tail with it’s balanced approach in the moderate base and rake for timeless logging.

Rail: Full
Bottom: Single to double concave
Ideal waves: 1-6ft
Level: Beginner – Expert

– The best selling longboard range in the world is available in two designs, white & navy.

– The best in versatile longboard performance, using technically advanced construction at extremely attractive retail prices.

– Great longboard. It’s a proven classic for swooping bottom turns, high trim lines and drop knee cutbacks.

– New, sharper rails in the tail, a modern performance rocker combined with mellow V bottom, blended with a subtle double concave.

– Upgrades on the original shape make the Elements Longboard easy to trim on the wave and dynamic when riding off the tail.

Length Width Thickness Volume Weight +/- 5%

10'0'' 23 ¹/² 3 ¹/⁴ 92.3 7.5

3.5” Hand mixable Epoxy Putty Stik. Dries white after mixed. Super strong and can be used on wet surfaces.

Also Includes:

• 4 Alcohol Wipes, to clean fingers
• 2-Grade Sanding Paper

Captain Fin Pivot Clear

Template: Pivot—ideal for square tails and pintails that want a looser action.

Ideal Board: Longboards.

Construction: Fiberglass construction.

The Captain Fin Pivot is an upright pivot fin with wider base for your classic pintail or squaretail that is ideal for long, loose rides and extra time on the tip.

As the predecessor to the 4A, this template is important. It was conceived in the early ‘70s, and is a direct descendent from the original Stage 4 that swept the surfing world. We offer this fin to be used as you see fit. Positive reports have come in from a wide range of applications.

We'll just say this is one of the most classic, fundamental designs of a single fin for longboards… ever!!

With a name like The All Rounder it’s no surprise this surfboard will have a large sweet spot when it comes to catching waves. Essentially, it is designed to be an affordable, user-friendly longboard that’s spec’d appropriately for easy riding with an emphasis on stability, control and smooth turning.

OUTLINE: While not too dissimilar to other longboards on the market, The Allrounder has a very balanced outline, with loads of surface area up front for surfers more capable at nose riding, a parallel mid-section which creates a huge standing zone, and enough taper in the tail to break a line and turn smoothly.

ROCKER: Nice and low through the entry makes for fast paddling, which equates to more waves, tick! Relaxed through the middle, but with enough curve to promote a nice turning arc on the wave face. And finally, there’s a little extra lift in the tail to make turning easier for surfers moving up in their abilities

CONTOURS: While most performance longboards have complex concaves for rapid movement and response, The All Rounder has a more simplistic soft vee in the entry and middle, running into vee/double concave through the tail. This is designed to help promote smoother rail-to-rail transitions on a longer board, yet still provide control in steeper sections, and deliver a feeling of pivotal sensitivity when turning right off the tail.

FOIL: Designed with plenty of volume through the nose and tail, and also out towards the rails, providing added stability and making this board simple to ride, regardless of your skill level.

PERFORMANCE: This is the perfect entry level longboard due to the volume allocations, the ease at which it rides, and of course the price. However, more savvy surfers will tap into the true versatile nature of this board and its reliability across so many different types of waves. If you’re a traveller, or just like having one dependable longboard in your quiver, this is it.

The Logger Head is a contemporary version of an old school longboard design.

OUTLINE: The Logger Head is a wide and incredibly stable surfboard. The long parallel rails create a huge stable platform to stand and walk the board, and the full rounded nose is ideal for riding the nose.

ROCKER: Moderately flat entry rocker provides fast paddling and flowing down-the-line trim speed. The flat section through the middle gives this surfboard effortless glide, and slight lift in the tail enhances turning ability.

CONTOURS: A long, single concave under the nose provides lift for extended nose time, while vee through the belly and tail allows the rider to transition smoothly from rail-to-rail.

RAIL: Forgiving 60/40 rails not only provide bite on the wave face, but also allows for smooth transitional turns off the tail.

FOIL:Designed with plenty of volume through the nose and tail, and also out towards the rails, providing added stability and making this board simple to ride, regardless of your skill level.

AESTHETIC: Finished with 2 x 6ox layers on the deck and a single layer plus a fins patch on the bottom, coated with traditional resin tint, rail laps and matte sanded finish.

FIN: The Retro comes with a single fin box and 9″ inch Rake fin.

The Superfish 4 (SF4) is an amalgamation of the Superfish 3 shape, with some old design features from the past. While still targeted at surfer’s looking for a high volume modern fish shape, we believe this is our best Superfish yet; offering the perfect balance of stability and turning response

OUTLINE: Wider nose, fuller outline up front, and parallel rails create a large stable platform through to middle to generate speed. We’ve eliminated the flyer making a smoother curve in the back half of the board. The tail outline tapers so you can make tighter radius turns when you position your back foot right on the tail. The swallow tail also adds bite especially in smoother conditions.

DESIGN: The return of the original step deck! This feature increases volume through the spine and out towards the rails, creates a flatter deck, while allowing for a lower, more sensitive feeling rail. Single-to-double concave delivers a very consistent and predictable feel, without restricting speed or the ability to transition quickly from rail-to-rail between turns.

ROCKER: The 3 stage rocker is well balanced, with just enough flip in the entry to prevent nose-diving in steeper waves. The flatter mid section maintains forward drive and flow. Moderate curve out the tail presents the opportunity to really jam a nice turn when pushing harder off your back foot.

FOIL: We’ve added volume to this model, under the chest and extending towards the nose and tail. This provides amazing paddle power so you can get into waves early.

PERFORMANCE: Renowned for its wave catching prowess, this model really does appeal to a wide demographic. It’s the perfect board if you’ve just started turning and you want to progress to the next level of performance. Or maybe you’re getting a little older, you’re struggling on a smaller board, and you want to keep turning. From knee high, to well overhead, the SF4 will keep you coming back for more.

The 7S Super Fish does not come with fins. See spec table below for suggested template.

NOTE: Rider weight is based on board volume and intermediate rider skill level

With a name like The All Rounder it’s no surprise this surfboard will have a large sweet spot when it comes to catching waves. Essentially, it is designed to be an affordable, user-friendly longboard that’s spec’d appropriately for easy riding with an emphasis on stability, control and smooth turning.

OUTLINE: While not too dissimilar to other longboards on the market, The Allrounder has a very balanced outline, with loads of surface area up front for surfers more capable at nose riding, a parallel mid-section which creates a huge standing zone, and enough taper in the tail to break a line and turn smoothly.

ROCKER: Nice and low through the entry makes for fast paddling, which equates to more waves, tick! Relaxed through the middle, but with enough curve to promote a nice turning arc on the wave face. And finally, there’s a little extra lift in the tail to make turning easier for surfers moving up in their abilities

CONTOURS: While most performance longboards have complex concaves for rapid movement and response, The All Rounder has a more simplistic soft vee in the entry and middle, running into vee/double concave through the tail. This is designed to help promote smoother rail-to-rail transitions on a longer board, yet still provide control in steeper sections, and deliver a feeling of pivotal sensitivity when turning right off the tail.

FOIL: Designed with plenty of volume through the nose and tail, and also out towards the rails, providing added stability and making this board simple to ride, regardless of your skill level.

PERFORMANCE: This is the perfect entry level longboard due to the volume allocations, the ease at which it rides, and of course the price. However, more savvy surfers will tap into the true versatile nature of this board and its reliability across so many different types of waves. If you’re a traveller, or just like having one dependable longboard in your quiver, this is it.

TIME TO WALK THE PLANK!

Move over hipsters! There’s a new Odysea® in town!  Whether you like camping out on the nose or dropping a little knee on your turns, the Plank delivers that smooth old-school single-fin flavor with that same great LOG mega-float for wave hogging.

6’0” x 22.0” x 3.125” (57 Liters) - 7.5" Fin
7’0” x 22.0” x 3.125” (72 Liters) - 7.5" Fin
8’0” x 23.0” x 3.375” (86 Liters) - 9.0" Fin
9.0” x 24.0” x 3.5” (98 Liters) - 9.0" Fin **IN STORE ONLY**

• Special Fin Box that Accepts any Standard Longboard Fin
• Performance Single Fin Included
• Super-Fun for all Skill Levels
• Tons of Float and Easy Wave Catching
• Stiff Dual Composite Core
• Triple Maple-Ply Stringers!
• Durable HDPE Slick Bottom with Bumper-Tail
• Old-School PE Deck with Throwback Design
• Designed by Catch Surf in California, U.S.A.

TIME TO WALK THE PLANK!

Move over hipsters! There’s a new Odysea® in town!  Whether you like camping out on the nose or dropping a little knee on your turns, the Plank delivers that smooth old-school single-fin flavor with that same great LOG mega-float for wave hogging.

6’0” x 22.0” x 3.125” (57 Liters) - 7.5" Fin
7’0” x 22.0” x 3.125” (72 Liters) - 7.5" Fin
8’0” x 23.0” x 3.375” (86 Liters) - 9.0" Fin
9.0” x 24.0” x 3.5” (98 Liters) - 9.0" Fin **IN STORE ONLY**

• Special Fin Box that Accepts any Standard Longboard Fin
• Performance Single Fin Included
• Super-Fun for all Skill Levels
• Tons of Float and Easy Wave Catching
• Stiff Dual Composite Core
• Triple Maple-Ply Stringers!
• Durable HDPE Slick Bottom with Bumper-Tail
• Old-School PE Deck with Throwback Design
• Designed by Catch Surf in California, U.S.A.

Now on our Tenth revision, our exclusive 3rd Coast Surfboard line is a collaboration between TCSS and the professional craftsmen at Bing Surfboards in Encinitas, California. The Bing label is one of the oldest in the world, and today they continue to build some of the highest quality surfboards to be found anywhere. TCSS owner Ryan Gerard and head Bing shaper Matt Calvani worked together to design a line of three models that would be ideal for Great Lakes surf, but like a good surfboard should, also work well anywhere in the world. We are very fortunate to be able to offer these boards at incredibly reasonable prices.

Get a free 10 Year TCSS + Bing Anniversary Pocket Tee with your board purchase!

The whole idea behind our 3rd Coast line of boards is simple: easy to surf, functional surfboards built by the finest craftsmen in the industry, and offered at very reasonable prices. The longboards exemplify this to a tee, as they are great all-around boards that will paddle and catch waves well, surf free and easy, and last with good care. Featuring our Classic Chief logo, this board looks awesome in and out of the water.

DIMENSIONS

NOSE: 18 3/4"
WIDTH: 23 7/8"
TAIL: 15 1/4"
THICKNESS: 3 1/4"
VOLUME: 89.9L

TAIL: Square Tail
COLOR: White/Blue
FINISH: Sanded
FIN: Single (included)

If you're unsure what model and/or size will work best for you, give us a ring and we'll help you get it figured out: 269-932-4575

Imagine riding in an old Cadillac… You know how the old classic cars just seem to glide and almost float along the road? Well, that’s exactly the feel on offer with the Salt Gypsy Dusty Longboard.

The Dusty is by no means a performance Longboard, this board is about getting onto waves really early, setting the line, and then feeling the trim as you cruise down the line. Optimum conditions are small to medium size waves, and it will really feel at home on a long point wave.

*All Salt Gypsy surfboards were tested and designed with appropriate dimensions and volume allocations to suit female surfers so they can get the most out of every wave – they also come in a 100% stretch cotton dust jacket ensuring that zero plastic is used in the packaging of these surfboards.

This bag is packing 5mm of foam to give you that extra protection your board may need if you like to play rough. Need a place for your stash? Throw it in the secret pull out “storage” pocket. Don’t worry about salted zips; all molded non-corrosive zippers will keep the movement smooth for the life of the bag.

Specifications:

Designed for day use.
5mm padding.
Molded non-corrosive zippers.
New upgraded 420d super light ripstop nylon on top.
Semi-reflective/heat resistant 266PE on bottom.
Custom Pro-Lite print panels.
Top zip flip top opening for ease in sliding your board in and out of the bag.
Strap pocket to stow strap and accessories during travel.
Padded shoulder strap with Velcro closure system.
Padded handle for extra comfort.
External wax/key pocket.
Fixed size hang tag.
Inner storage pocket.
Reinforced nose.
Rail guard around the zipper to protect your board.
Closeable vent to allow air flow to keep your board cool.
Long board bags up to 9’6, 27” width. Long board bags 10’0-12’0, 29.5” width.
Keep in mind that the widths listed above are how the bags are "cut"
Max allowable width decreases with thicker boards.
This bag is cut close to 3" long to accommodate boards of equal size.
Empty bag weight 4-7lbs depending on size.
All bag sizes feature a center Velcro fin slot.

Rail: Full
Bottom: Single to Vee
Ideal waves: 1-6ft
Level: Beginner – Expert

Design:

Fins:
Available in three designs, the Elements funboard comes with three nylon twin tab M7 or new MFC designed FTU fins. For riders wanting more grip from their board, or simply looking for a different setup from their fin clusters, J7 RTM upgrades from NSP are available. Find them listed further down below under “optional accessories”.

Additional Information

Elements Funboard
Consider the NSP funboard the “in-between” – halfway between the longboard and the fish. Often considered the next step for a surfer who has spent enough time practising on a longboard. Not quite ready yet for a fish or a shortboard, Elements Funboards are a great platform for quick progression, whether you are renting at a surf school or as an owner of an Elements Funboard.

Finboxes:
The five-fin box system offers the option of stock tri-fin or optional quad-fin set up to optimize the fin cluster for your style or for the surf conditions. On average-to-smaller days, go quad, and keep the thruster setup for the bigger days when conditions allow for committed turns.

Elements HDT Construction

Durability, value and performance – the go-to board for any recreational surfer. Elements HDT (High Definition Technology) takes its name from an evolved production process that results in durability, value and performance. Go check out our longboards, Funboards, Fish, Tinder-D8 and Hybrids in Elements construction.

Perfect shape reproduction
Exclusive HDT molding technology delivers highly accurate shape reproduction with dynamic flex characteristics.

Light but durable construction
EPS SecureCell core is wrapped in lightweight fiberglass and molded creating a durable shell. Full length glass stringer adds extra strength, durability and life-time to the board.

Great value and performance
Great performance shapes at attractive prices. The amazing blend of construction features, including eco-friendly bio-resin is a game-changer in its category.

Funboard Profile

Rail: Full
Bottom: Single to double concave
Ideal waves: 1-6ft
Level: Beginner – Expert

Elements Longboard Design:

One of our very best-selling boards, this longboard in Elements construction is available in three designs – white, red and blue. Note that the 10-footer longboard is the only one in the range that comes with a single fin, whereas all the other sizes feature a 2 +1 setup.

In addition to that, the NSP longboard shape has been around for several years now, steadily evolving into the ultimate and most accessible longboard we offer today. The Elements Construction is durable and comes at an attractive price point, plus the included fins make sure you get to take this board to the beach straight away and start styling.

Fins:
The Elements Longboards (8’0″, 8’6″, 9’0″ & 9’6”) are available with either 2 x twin tab fins or 2x NSP’s new MFC-designed side biters and a center fin. The 10’0″ comes with a single 9″ center fin.

Elements Longboard comes in three designs
• The best selling longboard range in the world is available in three designs, white, navy and the new red.
• The best in versatile longboard performance, using technically advanced construction at extremely attractive retail prices, fins included.
• Great longboard. A proven classic for swooping bottom turns, high trim lines and drop knee cutbacks for days on end.
• New, sharper rails in the tail, a modern performance rocker combined with mellow V bottom, blended with a subtle double concave.
• Gradual upgrades over the years make the Elements Longboard very easy to trim. When riding off the tail, the ride characteristics are more dynamic.
• Also available in E+Longboard, Protech and P2 Soft, the Elements Longboard is a proven classic, available in a construction that’s perfect for you!

Elements Longboard construction

Elements Longboard Construction:

• Exclusive HDT moulding technology delivers highly accurate shape reproduction with dynamic flex characteristics
• EPS SecureCell core is wrapped in lightweight fiberglass and moulded, creating a durable shell
• Great performance shapes at attractive prices
• The amazing blend of construction features eco-friendly bio-resin, a game-changer in its category
• All Elements boards come with wide fiberglass stringers for additional strength

Rail: Full, tucked edge
Bottom: Concave into V
Ideal waves: 1- 6ft
Level: Beginner – Expert

– The Hooligan design incorporates the responsiveness of a narrow shortboard tail and rail profiles to create a longboard that carves unlimited lines and hits the lip.

– The advanced surfer will appreciate the loads of hollowed V under the feet to give quick rail-to-rail turns.

– Show off all your surfing skills with a dynamic short board approach to rail to rail carving, then switch modes for classic nose riding and traditional longboard style.

– Use a small single fin for small surf then add side biters and larger center fin as wave size and power increases.

– Bring out your inner surf hooligan, break down the traditional surf style rules and mix things up on the wave with an aggressive modern and classic style!

Shaper: Kym Thompson

DESCRIPTION

Two small but pronounced shifts in the rail line increase the maneuverability of the Dream Rider.

Typically, these "wings" allow shapers to utilize the more loose-turning characteristics of a wider tail ahead of the wings and combine this with the holding power of the narrower tail immediately following them. Kym Thompson chooses to use this design feature as the wings break and shorten the length of the rail line, making the board looser and more playful.

Rail: Full, Tucked edge
Bottom: Concave into V
Ideal Waves: 1 - 6 ft
Level: Beginner – Expert